How To Install The Steelcase Leap V2 Headrest?
Congratulations on receiving your Headrest from OfficeLogixShop for the Steelcase Leap V2 chair! This guide will walk you through the unboxing and installation process so you can quickly enhance your seating experience with this ergonomic addition.
WHAT YOU'LL FIND INSIDE YOUR PACKAGE
- A set of instructions with a QR code for a video installation guide.
- Protective material wrapping various parts to ensure everything arrives safely.
- The headrest itself, designed for a tool-less installation.
TOOLS REQUIRED
This installation is designed to be tool-less, thanks to the innovative design of the headrest components.
INSTALLATION STEPS
PREPARING FOR INSTALLATION
- Unwrapping: Start by unwrapping all parts from the protective material. This includes the headrest and any other components that came in the package.
- Folding the Headrest: Unfold the headrest from its folded back position. Simply fold it forward to get started.
INSTALLING THE SPINE
- Removing Bolts: Temporarily remove the two bolts and the lower holding part, and set them aside for now. These bolts are protected by a rubber liner to prevent scratches on the chair.
ATTACHING THE HEADREST
- Clipping the Headrest: Clip the headrest at an angle onto the Leap V2’s back rail and center it as shown in the video.
- Inserting Braces: Insert the two braces into the gap between the fabric and the back of the chair.
SECURING THE SPINE
- Attaching the Lower Holding Part: Get the lower holding part and the bolts, ensuring the curved hook of the lower holding part is facing you. Clip it right beneath the Steelcase logo.
- Tightening Bolts: Install the bolts and tighten them, making sure the rubber liner is properly placed and covering the gap. The liner might slow down the tightening process slightly, but it is there to ensure your Leap V2 is fully protected from any potential scuff marks.
FINAL ADJUSTMENTS
Adjusting for Comfort: Adjust the headrest to match your preferred ergonomic settings. Test the setup by sitting and leaning back, making further adjustments as necessary for comfort and support.
WRAPPING UP
Once you've made the necessary adjustments and are satisfied with the fit, your headrest installation is complete! Enjoy the added comfort and support of your Leap V2 chair, now enhanced with the OfficeLogixShop headrest. We appreciate your business and welcome any feedback to improve our products and services. Thank you for choosing us, and don't hesitate to reach out with comments or suggestions.