How to Change the Arm Pads on Your Herman Miller Mirra 1 Chair?
Today, we're diving into the process of changing the arm pads on your Herman Miller Mirra One chair. This simple yet crucial maintenance can refresh the look and comfort of your chair, ensuring it continues to provide optimal support. With Herman Miller discontinuing the Mirra 1 chair and its original arm pads, OfficeLogixShop steps in to offer aftermarket arm pads of the same quality. Let's start with the replacement procedure.
Tools Needed:
- Mirra 1 Arm Pads
- Star Key Screwdriver (recommended)
- Electrical Drill (optional, use with caution)
Steps to Change the Arm Pads:
Removing the Old Arm Pads:
- Begin by unbolting both arm pads from the chair. Keep the bolts handy as you will need them to secure the new arm pads.
Handling the Knob and Springs:
- Upon removing the arm pads, it's common for the knob and springs to detach from the rails. Carefully insert them back into place.
- Test their functionality by pressing the adjustment button. Ensure the arm pad moves horizontally only when the button is pressed. If it moves without pressing the button, recheck the springs and knobs for proper placement.
Installing the New Arm Pads:
- Position the new arm pads without fully inserting them initially. This approach makes aligning the screws with the screw holes easier.
- We recommend using a star key screwdriver to avoid damaging the screws. If you opt for an electrical drill, proceed with caution and ensure the screw aligns with the hole before tightening.
Conclusion:
You've now successfully replaced the arm pads on your Herman Miller Mirra 1 chair, rejuvenating its comfort and functionality. As the first to produce aftermarket arm pads of original quality for the discontinued Mirra 1, OfficeLogixShop.com is your go-to source for quality replacement parts. Refresh your office chair today and ensure it continues to meet your ergonomic needs.